LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 972 (Wiring System (Repairing - General Information)) >> 97 Wires >> Wiring Harness And Connector Repairs >> Tool Descriptions >> Crimping Pliers -.35-2.5mm:VAS1978/1A >> Notes

Crimping Pliers -.35-2.5mm:VAS1978/1A: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The : VAS1978/1A  or the :VAS1978/1-2  together with the :VAS1978/1-1  , the :VAS1978/1-3  , or the :VAS1978/2A  are used to press the crimp connector from the wiring harness-repair kit.

GWWN97-10491Courtesy of AUDI OF AMERICA, LLC

Crimp connectors, press using the :VAS1978/1A  .

The following crimping heads are available for the :VAS1978/1-2  :

In conjunction with :VAS1978/9-1  , crimping pliers are used to crimp terminals onto individual wires when repairing wiring cross-sections up to 0.35 mm2 .