Special Tools
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1331 5-50Nm:VAG1331
- Wiring Harness Repair Set:VAS1978A
- Wiring Harness Repair Set:VAS1978B
- Adjust the sliding stop in the Wiring Harness Repair Set - Wire Strippers:VAS1978/3
pliers jaws to 12 to 14 mm for the wire to be stripped.
- To press the crimp connector, use the Wiring Harness Repair - Crimping Plier - Base Tool:VAS1978/1-2
with Wiring Harness Repair - Crimping Head -.35-2.5mm:VAS1978/1-1
.
- Wiring Harness Repair Set - Hot Air Blower:VAS1978/14A
from the Wiring Harness Repair Set:VAS1978B
- Wiring Harness Repair - Blower - Shrink Element:VAS1978/15A from the Wiring Harness Repair Set:VAS1978B
- Wiring Harness Repair Set VAS631 003:VAS631003
- Release Tool Set:VAS1978/35
- Fiber Optic Repair Set:VAS6223B
- Hose Cutting Pliers:VAS6228
- Contact Surface Cleaning Set:VAS6410
- -1- Adapter wire, for connection to radio; length: approximately 30 cm
- -2- Connecting wire, available in various lengths
- -3- Adapter wire, for connection to antenna; length: approximately 30 cm
- Contact Surface Cleaning Set:VAS6410
- Aerial Cable Repair Set:VAS6720
- Wiring Harness Repair - Blower - Shrink Element:VAS1978/15A from the Wiring Harness Repair Set:VAS1978B
- Wiring Harness Repair Set:VAS631001