ESD Work Surface :VAS6613, USING
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The electro-static discharge :VAS6613 protect electronic components from getting damaged by an electro-static charge.
- This makes is possible to perform repairs on sensitive electronic components on an open mat.
- For more information as to what work can be performed on the :VAS6613 . Refer to the "Electrical Equipment" chapter in the.
-- Place the electro-static discharge mat -3- from :VAS6613 on a clean, dry table.
-- Connect the Ground (GND) -2- to one of the buttons on the mat.
-- Connect the GND connector adapter -1- to the adapter connector on an outlet with contact protection or connect the alligator clip to a ground in the building or a water pipe.
-- Connect the wrist strap -4- to one of the buttons on the mat.
-- Attach the wrist strap directly to your wrist - never to your shirt sleeve or jacket sleeve.
CAUTION:
If working on especially sensitive electronic component and with the pad exposed, use only non-magnetic tools, for example, a :T10072 .