LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 972 (Wiring System (Repairing - General Information)) >> 97 Wires >> Contact Surface Cleaning Set :VAS6410 >> Contact Surface Cleaning Set :VAS6410, USING >> Protecting

Contact Surface Cleaning Set :VAS6410, USING: Protecting

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Missing protection leads to the electrical system damage.

NOTE:

All threaded connections must be tightened to the specified torque.

When applying protection, always use the accompanying hose on the protection container.

Protection wax is used in the cool area.

Cavity protection wax is used in the warm area.

The protection material draws itself into the affected places by capillary action.

-- Hold the injector under the wiring eyelet and spray all around the pins.

GWWN97-10794Courtesy of AUDI OF AMERICA, LLC

-- Hold the injector above the wiring eyelet and spray all around the pins and wiring eyelet.

GWWN97-10795Courtesy of AUDI OF AMERICA, LLC