E-Box, Removing And Installing, Vehicles With 3.0L TDI Engine (Ea897 Gen I): Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the ground cable from the Battery -A- when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the bolts -arrows- and remove the cover -1- for the E-Box.
-- Release the fasteners in direction of -arrows-, remove the relay panel with the fuse panel -1-, free it up and set it on the engine.
-- Remove the bolt -arrow-.
-- Remove the E-Box -1- upward.