LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 969 (Exterior Lights & Switches Systems (Service Information)) >> Exterior Lights, Switches >> Headlamps >> Left/Right Headlamp Power Output Module -J667- / -J668-, Removing And Installing >> Notes

Left/Right Headlamp Power Output Module -J667- / -J668-, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

High voltage increases the risk of fatal injury.

  • When working on HID headlamp components marked with yellow high-voltage symbols, these components must be de-energized.
  • Turn off the ignition and all electrical equipment and remove the ignition key.
  • Do not flash the headlights (flash-to-pass).