Seat Ventilation Control Module (Integrated In Seat Heating), Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way to the rear and then into its highest position.

-- Press the releases -arrow- disconnect the connector -2- from the seat ventilation control module -1-.

-- Release the tab -arrow 1- with the :3409 .

Courtesy of AUDI OF AMERICA, LLC

-- Swivel the seat ventilation control module downward -arrow 2-.

-- Disengage and the hook -arrow 3- on the seat ventilation control module from the bracket and remove the module.

NOTE:

Detach the front seat and tilt it to back if the seat ventilation control module is not accessible. Refer to FRONT SEAT, REMOVING AND INSTALLING .