Seat Forward/Back Adjustment Release Cable, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Fasten the front seat on the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Open the cable tie or unclip the clip on the lower seat frame.

-- Disengage the release cable bracket -1- from the seat forward/back adjustment -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the end of the release cable -arrow- at release cable retainer lever -3- of the seat forward/back adjuster.

-- Disengage the release cable bracket -2- from the seat forward/back adjustment -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the release cable -1- that seat forward/back release cable mount -arrow A-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the ball-shaped end of the release cable -arrow B- at the seat forward/back adjuster groove.

-- Remove the release cable.