Safety Ground Lock, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Check if the spring is installed in the retaining plate.
-- Install safety ground lock and secure with the retaining plate.
Checking Safety Ground Lock for Ease of Movement
The test must be done subject to the following conditions:
- After installations on the safety ground lock.
- After an accident, even if the front seat is undamaged according to initial appearance.
Test Sequence
- The pendulum of the safety ground lock must move freely.
- To check the pendulum by hand, press it against the spring and release it.
- The pendulum must return to its original position due to the spring force, and the latch on the opposing teeth be completely opened.
- If the pendulum does not return to its starting position even once in at least 5 test cycles, the safety ground lock and the spring must be replaced.