LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 968 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Seat Angle Adjuster, Removing And Installing >> Seat Angle Adjustment Handle, Removing And Installing >> Removing

Seat Angle Adjustment Handle, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-10748Courtesy of AUDI OF AMERICA, LLC

-- Remove the trim on the sill side. Refer to SEAT SIDE TRIM ON SILL PANEL SIDE, REMOVING AND INSTALLING, FRONT SEAT (MANUAL) .

-- Pry the handle -2- off the seat angle adjustment -1- by using a screwdriver to press down the clip locking spring.

scientia non olet · About LEMON Manuals