LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 968 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Seat Angle Adjuster, Removing And Installing >> Seat Angle Adjustment Handle, Removing And Installing >> Installing

Seat Angle Adjustment Handle, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-10749Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Replace the clip on the seat angle adjuster lever. Pay attention to the installed position.

-- Make sure the seat height adjustment handle engages correctly with the clip.

scientia non olet · About LEMON Manuals