Overview - Seat Pan, Seat Height Adjustment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Seat Height Adjustment (Manual). Refer to OVERVIEW - SEAT PAN, SEAT HEIGHT ADJUSTMENT

Seat Height Adjustment Motor. Refer to OVERVIEW - SEAT PAN, SEAT HEIGHT ADJUSTMENT

Seat Height Adjustment (Manual)

Fig 1: Seat Pan, Seat Height Adjustment Exploded View

Courtesy of AUDI OF AMERICA, LLC

Seat Height Adjustment Handle
- Removing and installing. Refer to SEAT HEIGHT ADJUSTER HANDLE, REMOVING AND INSTALLING .
- Push the handle all the way on
- Replace the seat height adjustment if the tab -arrow A- is damaged
- Lock the tab -arrow A- with the catch -arrow B-.
Bolt
- 6.5 Nm
- Quantity: 2
- Note the different bolt length -4-
Seat Height Adjuster
- Removing and installing. Refer to SEAT HEIGHT ADJUSTER, REMOVING AND INSTALLING .
Bolt
- 10 Nm
- Note the different bolt lengths -2-
Lock Washer
- Always replace if removed
Bolt
- 8 Nm
- Quantity: 2
Lever
- For seat height adjustment handle
- Removing and installing. Refer to SEAT HEIGHT ADJUSTER, REMOVING AND INSTALLING .

Seat Height Adjustment Motor

Courtesy of AUDI OF AMERICA, LLC

Seat Pan
Bolt
- 22 Nm
  CAUTION:
  The bolt has a left-hand thread.
- Self-locking
- Replace
- Removing and installing. Refer to SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
- Clean the threaded hole with a thread tap.
Driver Seat Height Adjustment Motor -V245-
- Front passenger side: Front Passenger Seat Height Adjustment Motor -V246-
- Removing and installing. Refer to SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
Bolts
- 10 Nm
- Quantity: 2
- Self-locking
- Replace
- Threaded holes for bolts must be cleaned, for example, with a thread tap
Bracket
- Bolted with the seat pan
Bolt
- Self-locking
- Replace after removing
- Clean the threaded hole with a thread tap.
- Tightening specification. Refer to OVERVIEW - SEAT PAN, SEAT ANGLE ADJUSTER .
Bolts
- 20 Nm
- Quantity: 2
- Self-locking
- Replace
- Threaded holes for bolts must be cleaned, for example, with a thread tap