LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 968 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Headrest, Removing And Installing >> Removing

Headrest, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-11117Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat forward into the lowest position and tilt the backrest approximately 45°.

Vehicles with Basic Seats 

NOTE:

The release button is located on the outer left of the driver seat and inner left of the passenger seat.

-- Search for release button pressure point -2- under the seat cover.

-- Press release button -arrow- and simultaneously pull out headrest -1-.

Vehicles with Comfort Seats 

GWWA72-11348Courtesy of AUDI OF AMERICA, LLC
NOTE:

The release button is located on the left and right headrest guide.

-- Search for release button pressure point -2- under the seat cover.

-- Pull on both sides of the headrest -1- and remove it from the headrest guide.

-- Press the release button -arrow- and remove the headrest at the same time.