Rear Seat Entertainment Mount/Bracket, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The rear seat entertainment mount cannot be removed without being destroyed.

WARNING:

Danger of eye injury.

Wear protective eyewear.

-- Remove the rear seat entertainment mount guides -1 and 2- with a 13 mm drill.

CAUTION:

Danger of destroying the backrest cover and cushion.

The guides are held in the bracket in the backrest frame by the retaining tabs -arrows-.
Therefore only remove it up the bracket -3- dimension -a-.

-- Remove the rear seat entertainment mount -1- from the bracket on the backrest frame -arrows-.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Remove the drill shavings from the backrest.

-- Remove the backrest cover and cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 3-.

-- Unhook the rear seat entertainment bracket -2- on the backrest frame in direction of -arrow-.

-- Release the hooks in direction of -arrow- and unhook the contact -2- on the rear seat entertainment bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket -1- for the rear seat entertainment.