LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 968 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Front Backrest, Removing And Installing >> Backrest Cover, Removing And Installing, Multi-Contour Seat >> Installing

Backrest Cover, Removing And Installing, Multi-Contour Seat: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install backrest cover with catches at the bottom of the backrest frame.

-- Insert the clips together with hooks into the guides on the backrest cover.

-- Forcefully press backrest cover in the direction of the backrest until the clips engage audibly.

-- Check if the backrest cover is correctly latched.

scientia non olet · About LEMON Manuals