LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 968 (Seats System (Frames- Service Information - 1 Of 2)) >> Seat Frames >> Front Seats >> Airbag Adapter, Connecting And Disconnecting >> Connector Station, Removing >> Notes

Connector Station, Removing: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-11521Courtesy of AUDI OF AMERICA, LLC

-- Open the locking mechanisms -1- with a screwdriver.

-- Pull the connector station -2- upward in direction of -arrow A- and remove it in direction of -arrow B-. Lift the floor covering slightly, if necessary.

-- Remove the connectors from the connector station.

scientia non olet · About LEMON Manuals