Overview - Cover And Cushion, 2-Seat Rear Bench

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cover And Cushion, 2-Seat Rear Bench Exploded View

Courtesy of AUDI OF AMERICA, LLC

Seat Frame
Cushion Clip
- For attaching the seat cover to the seat frame
- Replace
- Attach back at the same location when installing
Cushion Clip
- For attachment of seat cover to seat cushion
- Replace
- Install at the same location with Upholstery Clip Pliers :VAG1634 .
Wire
- Embedded in the foam of the seat cushion
- For attachment of seat cover to seat cushion
Contour Wire
- Inserted in the pocket of the seat cover
- For attachment of seat cover to seat cushion
Seat Cover
- Seat cover and cushion, removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Seat cover and cushion, removing and installing. Refer to COVER AND CUSHION, SEPARATING .
- Allocation. Refer to the Parts information.
- Make sure there are no folds after installing
Molding
- Sewn into seat cover
- For attaching the seat cover to the seat frame
- Make sure is fits correctly on the seat frame
Seat Cushion
- Seat cover and cushion, removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Seat cover and cushion, removing and installing. Refer to COVER AND CUSHION, SEPARATING .
- Allocation. Refer to the Parts information.