Overview - Center Armrest, Basic
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Right 2/3 Split Rear Seat Backrest
- Without pass-through opening
- Equipment levels
- Center Armrest Bracket
- With hinges
- Removing and installing. Refer to CENTER ARMREST BRACKET/HINGE, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
- Cover
- Clipped into the trim for the center armrest
- Removing and installing. Refer to REAR SEAT BACKREST CENTER STORAGE COMPARTMENT, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Screws
- 11 Nm
- Quantity: 4
- Self-locking
- Replace
- Threaded holes for bolts must be cleaned, for example, with a thread tap
- Bolt
- 4 Nm
- Trim Panel
- For the center armrest
- Removing and installing. Refer to CENTER ARMREST BRACKET/HINGE, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
- Install and press on it until it audibly latches
- Trim
- For the center armrest
- Removing and installing. Refer to CENTER ARMREST BRACKET/HINGE, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
- Check the hook for damage and replace if damaged
- Install and press on it until it audibly latches
- Rear Center Armrest
- Removing and installing. Refer to CENTER ARMREST, REMOVING AND INSTALLING .
- Bolt
- 0.9 Nm
- Bolt
- 4 Nm
- Rivet
- Rivet using the Pop Rivet Pliers :VAG1753B
- Nuts
- 8 Nm
- Quantity: 2
- Self-locking
- Replace