CUPHOLDER, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Fold down rear center armrest.
-- Pry off the trim -2- using the :3409 .
-- Release the tabs -arrows- starting at the lower edge.
-- Release the tabs -3-.
-- Remove the trim from the rear center armrest.
-- Open the flap -1- on the cupholder.
-- Release the spring -2- using a screwdriver and carefully remove the cupholder alternating between the sides.