Overview - Pneumatic System, Module Carrier/Air Cushion/Lumbar Support
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Quantity: 2
- 2.5 Nm
- Air Cushion for the Lumbar Support
- Removing and installing. Refer to AIR CUSHION FOR LUMBAR SUPPORT, REMOVING AND INSTALLING .
- Connect the pneumatic lines. Refer to PNEUMATIC LINES, DISCONNECTING AND CONNECTING
- Expanding Rivet
- Quantity: 4
- Module carrier
- Removing and installing. Refer to MODULE CARRIER, REMOVING AND INSTALLING .
- Rubber Buffer
- Solenoid valve block mount
- Quantity: 4
- Valve Block 1 in Driver Side Rear Seat -N479-
- Front passenger side: Valve Block 1 in Passenger Side Rear Seat -N481-
- Allocation. Refer to the Parts information.
- Removing and installing. Refer to Valve Block 1 in Driver Side Rear Seat -N479- /Valve Block 1 in Passenger Side Rear Seat -N481-, REMOVING AND INSTALLING .
- Connect the pneumatic lines. Refer to PNEUMATIC LINES, DISCONNECTING AND CONNECTING
- Seat Frame