Seat Bolster Adjuster, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
-- Remove seat cover with seat cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
-- Remove the expanding rivets -3 and 4-.
-- Free up the pneumatic line -1-, disengage the seat adjustment -2- from the lower seat frame and remove it.