Massage Mat Valve Block, Removing And Installing, Through 08/2012: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
-- Disconnect the connector -3-.
-- Push massage mat valve block -4- up slightly to detach it at the module carrier in direction of -arrow A-.
-- Carefully release locking mechanism in direction of -arrow B-, disconnect pneumatic lines -1 and 2-.
-- Disconnect pneumatic lines to the massage mat air cushions at the following points (refer to PNEUMATIC LINES, DISCONNECTING AND CONNECTING ):
a - 40 mm