LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 966 (Seats System (Frames- Service Information - 2 Of 2)) >> Seat Frames >> Front Seat Pneumatic System >> Driver Seat Switch Module 2 -E667 - /Front Passenger Seat Switch Module 2 -E668-, REMOVING AND INSTALLING >> Installing

Driver Seat Switch Module 2 -E667 - /Front Passenger Seat Switch Module 2 -E668-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-11198Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following: 

-- Insert trim with the tabs -1- in the grooves -2- on the switch module and press on it until it engages audibly.

scientia non olet · About LEMON Manuals