LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 965 (Climate Control System (General Information) (Refrigerant Circuit)) >> 87 Air Conditioning >> Refrigerant Circuit General Information >> Refrigerant Circuit Components Allocation, High And Low Pressure Sides >> O-Ring Seals

O-Ring Seals

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

These rings seal off the connection points between individual components of the refrigerant circuit.

Only O-rings that are resistant to refrigerant R134a and refrigerant oil must be installed. Make sure they are original replacement parts.

O-ring seals:

-- Always use only once.

-- Make sure diameters -a and b- are correct.

GWWA87-0021Courtesy of AUDI OF AMERICA, LLC

-- Coat with refrigerant oil before installing. Refer to REFRIGERANT CIRCUIT

NOTE:

The color coding of refrigerant circuit O-rings with R134a has been discontinued. Black and colored O-rings are used. Refer to the parts information and REFRIGERANT CIRCUIT