LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 965 (Climate Control System (General Information) (Refrigerant Circuit)) >> 87 Air Conditioning >> Refrigerant Circuit General Information >> Refrigerant Circuit Components Allocation, High And Low Pressure Sides >> Check Valves

Check Valves

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The check valves disconnect in different areas of the refrigerant circuit.

GWWA87-12180Courtesy of AUDI OF AMERICA, LLC
NOTE:

For example, the illustrated check valve -3- is installed on an Audi Q7 e-tron.

The check valves in the refrigerant circuit in the flow direction have a specified residual pressure, approximately 0.1 bar or 100 mbar (1.5 psi). So that the refrigerant circuit can be completely evacuates (residual pressure less than 5 mbar (0.10 psi)) all electrically activated valves must be opened.

Depending on the version the flow direction can be marked using a sticker.