Check Valves
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
The check valves disconnect in different areas of the refrigerant circuit. Refer to REFRIGERANT CIRCUIT [For engine(s) CTUA, CAED, CREH, CEUC, CTGE, CREC, CYNB, CPNB]
NOTE:
The illustrated check valve -3- is installed for example on a Audi Q7 e-tron. Refer to REFRIGERANT CIRCUIT [For engine(s) CTUA, CAED, CREH, CEUC, CTGE, CREC, CYNB, CPNB]
The check valves in the refrigerant circuit in the flow direction have a specified residual pressure (approximately 0.1 bar or 100 mbar (1.45 psi)). So that the refrigerant circuit can be completely evacuates (residual pressure less than 5 mbar (72.5 psi)) all electrically activated valves must be opened.
Depending on the version the flow direction can be marked using a sticker.