Passenger Compartment Forced Air Extraction, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to REAR BUMPER .
-- Open the luggage compartment side trim panel cover.
-- Remove the upper cover -1- from the vent frame -2-.
-- Release the cover on the side -arrow- and remove it.
-- Open the clips -arrows- and push the forced air extraction vent frame -1- outward.