Passenger Compartment Forced Air Extraction, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Installation is done is reverse order, observe the following:
-- Check the seal -1- for damages.
-- The ventilation frames -2- can only be installed in one position to ensure the sealing lips -3- close correctly.
- The larger radius -arrow- is at the top.
-- When installing, press the ventilation frame into the opening on the body until all the retaining tabs engage securely.
-- Reattach the cover on the vent frames.