LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Climate Control System (Service Information - (Front Heater & A/C Unit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Air Guide >> Air Distribution Channels, Removing And Installing >> Rear Air Guide Channel, Removing And Installing >> Removing

Rear Air Guide Channel, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA87-11058Courtesy of AUDI OF AMERICA, LLC

-- Remove the center console and the front center console bracket. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .

-- Remove the left rear upper body vent temperature sensor, if applicable. Refer to LEFT/RIGHT REAR UPPER BODY VENT TEMPERATURE SENSOR -G635- / -G636-, REMOVING AND INSTALLING .

-- Move the rear air guide channel -1- upward -arrow B- and remove it from the locking mechanism on the air distribution housing -arrow A-.

-- Remove the rear air guide channel.

scientia non olet · About LEMON Manuals