LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Climate Control System (Service Information - (Front Heater & A/C Unit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Air Guide >> Air Distribution Channels, Removing And Installing >> Driver Side Instrument Panel Vent Air Guide, Removing And Installing >> Installing

Driver Side Instrument Panel Vent Air Guide, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Installation is done is reverse order, observe the following: 

-- Make sure that the air guide is slid evenly onto the mount on the air distribution housing when inserting the central tube.

NOTE:

If the air guide is not positioned correctly on the mount, noises can result from escaping air or the escaping warm/cold air can affect the regulation of the A/C system.