LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Climate Control System (Service Information - (Front Heater & A/C Unit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Air Guide >> Air Distribution Channels, Removing And Installing >> B-Pillar Air Guide, Removing And Installing >> Removing

B-Pillar Air Guide, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA87-11001Courtesy of AUDI OF AMERICA, LLC
NOTE:

The left side is shown in the illustration.

-- Remove the upper B-pillar trim. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Free up the wiring harness -1 and 3-.

-- Remove the Air Ionization System Control Module -J897- from the right air guide, if applicable. Refer to Air Ionization System Control Module -J897-, REMOVING AND INSTALLING .

-- Remove the bolts -2, 4 and 5- from the expanding clip.

-- Remove the air guide -6- upward.