Overview - Rear Shelf
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 2 Nm
- Clip
- Quantity: 4
- insert in the rear shelf
- Remove any remaining clips in the body mounting points using the Omega Clip Tool :T40280 . To install, insert into the rear shelf.
- Replace damaged or deformed clips
- Rear Shelf
Vehicles with:
- without sun shade
- with sun shade
- no sound system
- with sound system
- Removing and installing. Refer to REAR SHELF, REMOVING AND INSTALLING .
- Insert the rear shelf in the rear window frame and press on the shelf until it clicks into place
- Cap
- For the child seat anchor
- Quantity: 3
- Equipped on some models
- Removing and installing. Refer to REAR LATCH CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
- Press on until it engages audibly
- Speaker Trim
- Quantity: 2
- Equipped on some models
- Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
- Insert in the rear shelf and press on it until it clicks into place
- Speaker
- Quantity: 2
- Equipped on some models
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - SOUND SYSTEM .
- Bolt
- Quantity: 4
- Tightening Specification. Refer to COMPONENT LOCATION OVERVIEW - SOUND SYSTEM .
- Bolt
- Quantity: 4
- 2 Nm
- Expanding Clip
- Quantity: 2
- Remove using the Pliers :T40172C
- Trim Panel
- for the rear window frame