Carpet, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front seats. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Remove the rear bench seat. Refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .

-- Remove the lower B-pillar trim panel. Refer to LOWER B-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the front sill panel strip. Refer to FRONT SILL PANEL STRIP, REMOVING AND INSTALLING .

-- Remove the rear sill panel strip. Refer to REAR SILL PANEL STRIP, REMOVING AND INSTALLING .

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .

-- Remove the front footwell cover. Refer to FRONT FOOTWELL COVER, REMOVING AND INSTALLING .

-- Remove the center console bracket and lower the shift mechanism. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .

-- Remove the rear air guide channel. Refer to REAR FOOTWELL VENT, REMOVING AND INSTALLING .

-- Remove the floor mat.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the floor covering at brackets -1 and 2-.

-- Pull the floor covering -3- back.

NOTE:

Make sure the floor covering does not tear at the openings.

-- Fold floor covering together and remove it through the rear door.