Instrument Cluster Frame, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the steering wheel as far down as possible.
-- Remove the instrument cluster gap cover. Refer to INSTRUMENT CLUSTER GAP COVER, REMOVING AND INSTALLING .
-- Remove the instrument panel vent on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL VENT, REMOVING AND INSTALLING .
-- Remove the center instrument panel vent. Refer to CENTER INSTRUMENT PANEL VENT, REMOVING AND INSTALLING .
-- Remove the bolts -1 and 3-.
-- Carefully unclip the frame -2- from the instrument cluster using the :3409 -arrow- and remove it.