LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 960 (Interior Trim System (Service Information)) >> Interior Trim >> Instrument Panel CROSSMEMBER >> Mounting Bracket, Removing And Installing >> Removing

Mounting Bracket, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA70-10831Courtesy of AUDI OF AMERICA, LLC

-- Remove the instrument panel crossmember. Refer to INSTRUMENT PANEL CROSSMEMBER, REMOVING AND INSTALLING .

-- Remove the bolts -1- and -3- and then remove the mounting bracket -2-.

scientia non olet · About LEMON Manuals