Rear Seat Belt Guide In Rear Shelf, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Install the seat belt guide -1- with the edge turned approximately 90° over the cut-out in the rear shelf as shown.
-- Insert the seat belt guide into the corner of the cut-out while turning it in the cut-out at the same time -arrow-.
-- Push the seat belt guide downward until the tabs engage in the rear shelf.