Overview - Airbag Control Module
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Airbag Control Module -J234-
- Removing and installing. Refer to Airbag Control Module -J234-, REMOVING AND INSTALLING .
- Control module is grounded via the housing with the body.
- Nut
- 9 Nm
- Quantity: 3
- The thread must be paint and contaminant free, nut and ground bolts serve as ground connection for the control module
- Connector
- Threaded Pins
- The thread must be paint and contaminant free, nut and ground bolts serve as Ground (GND) connection for the control module