Passenger Occupant Detection System Deactivation After A Collision, Market-Specific

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Each time an airbag or passenger belt tensioner deploys, a basic setting must be performed on the passenger occupant detection system control module using the Vehicle Diagnostic Tester.
If the seat rails and/or seat pan is replaced due to deformations resulting from a collision, the passenger occupant detection system must be replaced using the "passenger occupant detection system service kit". Then perform a "basic setting" on the passenger occupant detection system control module using the Vehicle Diagnostic Tester.