LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 956 (Engine Assembly -CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB) >> Engine Assembly >> SUBFRAME Mount >> Transmission Mount, Removing And Installing >> Transmission Support With Transmission Mount, Removing And Installing, Vehicles With S TRONIC Transmission 0CK >> Removing

Transmission Support With Transmission Mount, Removing And Installing, Vehicles With S TRONIC Transmission 0CK: Removing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the tunnel crossmember. .

-- Remove the bolts -arrows- and remove the transmission support with the transmission mount from the transmission.

GWWA34-11239Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals