LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 956 (Engine Assembly -CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB) >> Engine Assembly >> SUBFRAME Mount >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing, Vehicles With Automatic Transmission >> Removing

Transmission Mount, Removing And Installing, Vehicles With Automatic Transmission: Removing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the transmission support with the transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING, VEHICLES WITH AUTOMATIC TRANSMISSION .

-- Remove the bolt -1- and lower -2- for the transmission mount.

GWWA37-11041Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -4- and the bolt -5- and remove the transmission mount -6- from the transmission support -3-.