LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 956 (Engine Assembly -CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB) >> Engine Assembly >> SUBFRAME Mount >> Engine Mount, Removing And Installing >> Removing >> Wire Routing on the Left and Right Side Version 1

Wire Routing on the Left and Right Side Version 1

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left and right bracket with the connector -2 - for the Left Electrohydraulic Engine Mount Solenoid Valve -N144- /Right Electrohydraulic Engine Mount Solenoid Valve -N145- from the subframe.

-- Disconnect the connectors and free up the wires.

scientia non olet · About LEMON Manuals