Engine Mount, Removing And Installing: Notes

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine Support Bridge - Spindle :10-222A/11

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.

Mandatory Replacement Parts

Bolt - Engine Mount to Engine Support

NOTE:

To avoid repeat repairs, do the following if the engine mount is faulty:

Replace the faulty engine mount and its retaining plate.

Depending on vehicle equipment the engine mount on the opposite side must also be replaced. Refer to the Parts information for the allocation.