Automatic Transmission Transmission Mount 0BK

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Automatic Transmission Transmission Mount Exploded View

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0BK] .
Tunnel Crossmember
- Removing and installing. Refer to SUBFRAME MOUNT [For transmission(s) 0BK] .
Stop
- For the transmission mount
Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0BK] .
Nut
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0BK] .
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0BK] .
Transmission Support
- Removing and installing. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0BK] .
Nut
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0BK] .