Electro-Hydraulic Engine Mount, Calibrating: Procedure
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
-- Connect the Vehicle Diagnostic Tester.
-- Select the Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Drivetrain
- Engine - auxiliary and subsystem
- 01 - OBD-capable systems
- BA- Subframe Mount Control Module
- BA - Subframe Mount Control Module, Functions
- BA - Performing Basic Setting
- Preform the test