Overview- Engine Mount
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Engine Mount
- Depending on vehicle equipment left with the Left Electrohydraulic Engine Mount Solenoid Valve -N144-
- Depending on vehicle equipment right with the Right Electrohydraulic Engine Mount Solenoid Valve -N145-
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Retaining Plate
- For the engine mount
- If the engine mount is faulty, replace the retaining plate
- Bolt
- 40 Nm
- Bolt
- 20 Nm
- Engine Support
- With Air Conditioning (A/C) compressor bracket
- Heat Shield
- Bolt
- 10 Nm
- Bolt
- 90 Nm + 90°
- Replace after removing
- Subframe
- Bolt
- 55 Nm