Right Engine Mount:

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

Continuation for Both Sides:

Courtesy of AUDI OF AMERICA, LLC

-- If installed, disconnect the connector -2- from the electrohydraulic engine bracket solenoid valve.

-- Remove the bolts -1- and -arrows- and move the retaining plate to the side.

NOTE:

Ignore -item 2-.

-- Lift the engine using the :10-222A/11 -1- on the correct side to dimension -a-.

Courtesy of AUDI OF AMERICA, LLC

Dimension -a- = approximately 20 mm.

-- Remove the engine mount.