LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 952 (Steering System (Service Information)) >> 48 Steering >> Steering Wheel >> Steering Wheel, Removing And Installing >> Installing

Steering Wheel, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

Before positioning steering wheel, make sure wheels are in straight position.

-- When installing removed steering wheel: Make sure that markings on steering column/wheel align.

-- When installing a new steering wheel (without marking): Steering wheel must be position in center position (steering wheel spoke must be horizontal and wheels in straight-ahead position).

-- Install steering wheel.

-- Install the airbag unit. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .

-- Perform road test.

-- If steering wheel is crooked, remove it again and rotate it on steering column splines.

scientia non olet · About LEMON Manuals