LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 952 (Steering System (Service Information)) >> 48 Steering >> Steering Column >> Steering Column, Removing And Installing >> Installing >> Applies to Vehicles with the Steering Lock Lock-Up System

Applies to Vehicles with the Steering Lock Lock-Up System

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA48-10595Courtesy of AUDI OF AMERICA, LLC

-- After connecting the connector, -1- make sure the wiring harness is secured by the clip -2-.

-- If the steering column needs to be adjusted, be careful not to pinch the wiring harness -3- for the Electronic Steering Column Lock Control Module -J764- -1- and make sure it does not come in contact with any sharp edges.