LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 952 (Steering System (Service Information)) >> 48 Steering >> Steering Column >> Power Adjustable Steering Column Control Module -J866-, REMOVING AND INSTALLING >> Removing

Power Adjustable Steering Column Control Module -J866-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- If the control module is being replaced, then select "replace" control module on the Vehicle Diagnostic Tester in Guided Functions  .

-- Remove the steering column. Refer to STEERING COLUMN, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

GWWA48-10632Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2-.

-- Slightly lift the Power Adjustable Steering Column Control Module -J866- -3- and remove it from the steering column in direction of -arrow-.