Tightening Sequence
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
| Sequence | Screw Number | Tightening Specification |
|---|---|---|
| 1 | 1 | 2 + 2 Nm |
| 2 | 2 | 4 + 2 Nm |
| 3 | 1 | 8 + 2 Nm |
| 4 | 2 | 8 + 2 Nm |
| - | - | - |
-- Connect the connector to the actuator.
-- Erase the Diagnostic Trouble Code (DTC) memory.
-- Perform an initializing drive - turn the vehicle 45° to the left/right from the straight-ahead position.
Functional Check
Check the function of the steering during the road test and a fenced off area.
- Operating force
- Reset
- Play
- Noise
- Indicator lamp
- Read the DTC memory after the road test. There must be no faults in the DTC memory.